Dani kirjoitti:Open cell "varastoi" myös ainetta itseensä joka pidentää työstöaikaa ja näin ollen hankaloittaa viimeistelyä jos hioma-aine on ns. 1-step product. Closed cell taas parempi just tämän tyyppisille hioma-aineille.
DW:llä Carpro edustajan suusta:
Q&A with Avi of CarPro:
1Q.-The description of Fixer states Nano-fine finishing powders. What exactly is the size of these abrasives if I may ask?
1A.-Yes its ok not big secret, we use 100nm size particles among other abrasive powders
2Q.-Is Fixer a completely water based polish?
2A.- No, Fixer is not only water base, It has solvents as well to prevent the polish from drying so quickly and not break down completely.
3Q.-Hypothetically speaking, if I was to wipe Fixer off with a mf towel and move straight to Cquartz would the CQ bond as well as if I used Eraser between? I know CQ needs a completely clean surface and Eraser is what I use first but I'm curious because both products dome from CarPro if the Fixer and CQuartz are synergistic and compatible with no intermediary cleaner.
3A.-No! You must clean the surface after polishing. As stated before we use solvents inside as well.
4Q.-Does Carpro recommend either open or closed cell foam more one than the other with Fixer?
4A.-
Open cell foam works better than closed with Fixer.
5.-Btw, if you guys haven't already tested it with the Optimum mf pads Fixer works incredibly with them!
OK, good to know! We are soon showing our pads as well, which we tested and also work the best with Fixer.
Avi, as always thanks for your time in answering my questions and for the opportunity to test and review another useful product.
Thank you, I’m very glad you like our products. If there’s anything else you need let me know.
